A few years ago, 30×30 tile was the standard for floors. Now large formats are chosen more and more often: 60×60, 60×120 and even bigger. Let's look at their advantages, where they fit and why a large format is more demanding for the installer.
Advantages
Fewer joints. The floor looks seamless, especially in large rooms and spaces open to the kitchen.
Easier to clean. Dirt collects precisely in the joints, and there are far fewer of them.
Visually more space. Large slabs "stretch" a room.
Modern look. Large-format porcelain stoneware in concrete, marble or stone finishes suits minimalism and loft styles.
Limitations
A large format doesn't suit every room. In a small toilet, 60×120 will need a lot of cutting and the benefit of a seamless floor is lost. On a floor sloped towards a drain, large slabs are also awkward.
The second limitation is the base. A large format doesn't forgive unevenness: even 2–3 mm under a slab will create a "step" at the joint.
How a large format is laid
The base is levelled to a deviation of no more than 2 mm over 2 metres.
Adhesive is applied both to the base and to the back of the tile. That leaves no voids under the slab.
A tile levelling system is used: clips and wedges hold neighbouring slabs in one plane while the adhesive sets.
The joint is kept narrow, 2–3 mm. A rectified tile with precisely cut edges allows an even thinner one.
A 60×120 slab is carried by two people or on a special frame so it doesn't break.
Where a large format looks best
A living room open to the kitchen: one floor without thresholds across the whole area.
Hallway and corridor: fewer joints where there is the most dirt.
A medium or large bathroom: 60×120 tile on the walls creates the effect of stone panels.
You can see options in the 60×120 format in the 1200×600 tiles section.
УКР
ENG
Polish