Frost-resistant tiles for a terrace and porch: how to choose right

Outdoors, tiles go through what never happens inside a house: rain, snow, frost and direct sun. If you use an ordinary tile, it may crack or start to flake off after the very first winter. Below are the parameters worth paying attention to and a few laying rules.

What to check before buying

  1. Frost resistance. This is the main requirement. The manufacturer states it in the tile's specifications, often with a separate symbol.

  2. Water absorption. A tile with low water absorption is suitable outdoors. Water that gets into the pores expands in frost and destroys the tile from the inside. The best option is porcelain stoneware with water absorption up to 0.5%.

  3. Slip resistance. A wet or iced-over tile on a porch becomes dangerous. For outdoors, choose a tile rated R11 or higher, or with a textured surface.

  4. Thickness. For a terrace and porch it's better to use a tile from 9–10 mm thick. For areas where furniture or a barbecue will stand, there is 20 mm porcelain stoneware.

  5. Colour. A dark tile heats up a lot in the sun. For open terraces, light and medium shades are more practical.

Laying outdoors

Outdoors it isn't enough to buy the right tile. Mistakes during laying ruin even a very high-quality material.

  • The base has a 1–2% slope away from the house so water doesn't pool.

  • The adhesive must be frost-resistant, for exterior work.

  • The tile is laid with no voids beneath it. Air under a tile is where water will collect.

  • Leave a 4–6 mm joint between the tiles, and an expansion joint around the perimeter of the terrace.

  • Lay at above-zero temperatures, usually no lower than +5 °C.

When to do the work

The best time is spring and early autumn, when there is no intense heat or night frosts. It's better to order the tile in advance so it is already on site at the start of the season.

You can choose frost-resistant tiles for a terrace, porch or steps in the frost-resistant tiles section.