Porcelain stoneware or ceramic tile: the difference and what goes where

From the outside, porcelain stoneware and an ordinary ceramic tile can be hard to tell apart. Both materials are made from clay, both come in any colour and pattern. The difference is hidden inside: in the composition, density and firing temperature. That is what decides where each material lasts.

The main differences

Parameter

Porcelain stoneware

Ceramic tile

Water absorption

Below 0.5%

From 3% to 10% and more

Strength

Very high

Medium

Frost resistance

Yes

As a rule, no

Abrasion resistance

High

Lower, especially the glaze

Weight

Heavier

Lighter

Cutting

Harder

Easier

Porcelain stoneware is fired at a higher temperature and under greater pressure. That is why it has almost no pores and does not absorb water. Ordinary ceramic is porous: it is lighter and easier to cut, but copes worse with loads and frost.

What goes where

Porcelain stoneware:

  • floor in any room, especially the hallway and kitchen;

  • terrace, porch, outdoor steps;

  • commercial spaces with heavy footfall;

  • façades and ventilated façades.

Ceramic tile:

  • walls in the bathroom and kitchen;

  • kitchen backsplash;

  • decorative inserts and panels.

You can see more about floor options in the floor tiles section.

FAQ

Can porcelain stoneware be laid on walls? Yes. Heavy porcelain stoneware on walls is set with a high-grip adhesive, and large formats are sometimes fixed mechanically as well.

Why is porcelain stoneware more expensive? Because of the more complex production and higher density. But on the floor it lasts much longer, so the price difference pays off over time.

How do I tell porcelain stoneware apart in a shop? Look at the cut edge. In porcelain stoneware it is dense and uniform; in ceramic you can see a porous body and a separate layer of glaze.