In a bathroom one tile rarely suits everything. The floor is constantly wet and walked on with wet feet. Walls catch splashes and steam. The shower area is damp almost all the time. So it is easier to choose tiles separately for each zone and then combine them by colour and style.
Floor
A bathroom floor tile has to be slip-resistant. Pay attention to the anti-slip rating: for wet rooms R10 and above is the usual choice. It is better not to lay glossy tiles on a bathroom floor: on a wet surface they become dangerous.
The second key property is abrasion resistance. For a home bathroom class PEI II–III is enough. The most reliable floor option is porcelain stoneware: it is dense, barely absorbs water and is not affected by household chemicals.
Walls
For walls you can use a lighter glazed tile. It carries no load, so the freedom of choice here is much greater: gloss, relief, decors, light and dark shades.
A few practical tips:
A light gloss visually enlarges a small bathroom and reflects light better.
Dark colours are striking, but drops and limescale marks show up more on them.
A textured tile looks good, but takes longer to clean, especially near the basin.
Shower area
For a shower without a tray, a small-format tile or mosaic is the most convenient. The shower floor slopes towards the drain, and small pieces follow that surface better. A large format on a slope has to be cut.
Joints in the shower area are grouted with a water-resistant or epoxy grout. An ordinary cement grout darkens over time and can develop mould.
How to combine tiles in one bathroom
The simplest way is to take tiles from a single collection. Collections usually include floor and wall tiles, decors and borders matched by colour. You can see such sets in the bathroom tiles catalogue.
If you want to mix different series, stick to one principle: one tile is the lead (with a pattern or a bright colour), the rest stay neutral.
FAQ
Can a wall tile be laid on the floor? No. A wall tile is thinner and less durable; on the floor it will quickly scratch or crack.
How much spare tile should I buy? Usually 10% for straight laying and 15% for diagonal laying or complex cutting.
Which is better for a small bathroom: large or small format? A large format gives fewer joints and the room looks calmer. A small format suits the shower area and tricky surfaces.
УКР
ENG
Polish